Inicio Explorar Ayuda
Iniciar sesión
fphammerle
/
python-cc1101
espejo de https://github.com/fphammerle/python-cc1101
1
0
Fork 0
Archivos Incidencias 0 Wiki

Sin descripción

Árbol: e2cf81e481
Ramas Etiquetas
python-cc1101
ZIP TAR.GZ
Fabian Peter Hammerle e2cf81e481 release v1.1.0 hace 3 años
.github 33276e3118 configure github's dependabot to update Pipfile.lock (dev env) hace 4 años
cc1101 42946a578c added method `disable_checksum()` to disable automatic CRC sum appending in TX and checking in RX mode hace 3 años
examples 42946a578c added method `disable_checksum()` to disable automatic CRC sum appending in TX and checking in RX mode hace 3 años
tests 2bc397185f setup ci pipeline hace 4 años
.gitignore 2bc397185f setup ci pipeline hace 4 años
.pylintrc 2bc397185f setup ci pipeline hace 4 años
CHANGELOG.md e2cf81e481 release v1.1.0 hace 3 años
COPYING 994a9a5ede added GPLv3+ hace 4 años
Pipfile 5b54a89435 dev env: upgrade black hace 4 años
Pipfile.lock 551c14053b Bump mypy from 0.782 to 0.790 hace 4 años
README.md f26c421d47 readme: added pipeline badge hace 4 años
mypy.ini 991cc935f0 mypy: ignore missing imports hace 4 años
setup.py ae6858d95d setup.py: add python version classifiers after pipeline succeeded hace 4 años

README.md

python-cc1101

CI Pipeline Status Last Release Compatible Python Versions

Python Library to Transmit RF Signals via CC1101 Transceivers

Setup

$ pip3 install --user --upgrade cc1101

On Raspbian / Raspberry Pi OS, dependencies can optionally be installed via:

$ sudo apt-get install --no-install-recommends python3-spidev

Wiring Raspberry Pi

Directly connect the following pins:

C1101 Raspberry Pi
VDD 3.3V (Pin 1 or 17)
SI MOSI (Pin 19)
SO MISO (Pin 21)
CSn CE0 (Pin 24)
SCLK SCLK (Pin 23)
GND Ground

No resistors required. GDO0 & GDO2 are currently unused.

Raspberry Pi GPIO docs: https://www.raspberrypi.org/documentation/usage/gpio/

Usage

See examples.

import cc1101

with cc1101.CC1101() as transceiver:
    transceiver.set_base_frequency_hertz(433.92e6)
    print(transceiver)
    transceiver.transmit(b"\x01\xff\x00 message")

In case a PermissionError gets raised, check the permissions of /dev/spidev*. You'll probably need sudo usermod -a -G spi $USER, followed by a re-login.

CC1101's docs: https://www.ti.com/lit/ds/symlink/cc1101.pdf