from enum import Enum, IntFlag class MeterProWeatherIcon(Enum): """Weather icons supported by the Meter Pro and Meter Pro CO2 displays.""" NONE = 0 SUNNY = 1 CLOUDY = 2 OVERCAST = 3 LIGHT_RAIN = 4 HEAVY_RAIN = 5 LIGHT_SNOW = 6 HEAVY_SNOW = 7 class MeterProDisplayZone(Enum): """Configurable areas of the Meter Pro screen.""" MIDDLE = 1 BOTTOM = 2 class MeterProZoneIcon(Enum): """Icon shown next to a display zone.""" INDOOR = 1 OUTDOOR = 2 class MeterProDisplaySource(Enum): """Where a display zone takes its temperature and humidity from.""" NONE = 0 METER = 1 METER_PLUS = 2 INDOOR_OUTDOOR_METER = 3 HUB = 4 # Hub 2 and Hub Mini Matter METER_PRO = 5 # this device when the MAC is empty, else another Meter Pro NETWORK = 6 # values written with the weather command WEATHER_STATION = 8 HUB3 = 9 class MeterProDateFormat(Enum): """Date layout on the screen.""" MONTH_DAY = 0 DAY_MONTH = 1 class MeterProComfortStatus(Enum): """The device's current temperature and humidity comfort status.""" COMFORTABLE = 0 DRY = 1 WET = 2 UNAVAILABLE = 3 class MeterProAlarmMode(Enum): """How the meter signals a local threshold alarm.""" DISABLED = 0 FLASH_ONLY = 1 SOUND_AND_FLASH = 2 class MeterProAlarmVolume(Enum): """Alarm buzzer volume.""" OFF = 1 LOW = 2 MEDIUM = 3 HIGH = 4 class MeterProCO2AlarmMode(IntFlag): """CO2 alarm conditions and the protocol's custom-setting bit.""" DISABLED = 0 LOW = 1 HIGH = 2 IN_RANGE = 4 CUSTOM = 8 class MeterProCO2AlarmStatus(Enum): """Current CO2 alarm reported by the meter.""" NONE = 0 LOW = 1 HIGH = 2 IN_RANGE = 3 class MeterProTemperatureHumidityAlarmMode(IntFlag): """Local alarm conditions for the temperature and humidity limits.""" DISABLED = 0 TEMPERATURE_LOW = 0x01 TEMPERATURE_HIGH = 0x02 TEMPERATURE_IN_RANGE = 0x04 HUMIDITY_LOW = 0x10 HUMIDITY_HIGH = 0x20 HUMIDITY_IN_RANGE = 0x40 class MeterProTemperatureHumidityAlarmStatus(Enum): """Current alarm state of the temperature or humidity measurement.""" NONE = 0 LOW = 1 HIGH = 2 IN_RANGE = 3