intertechno-cc1101-mqtt

MQTT client controlling Intertechno Outlets via a CC1101 Transceiver

Compatible with Home Assistant's MQTT Switch platform.

Requirements

MQTT broker
Intertechno smart outlet
CC1101 transceiver
Linux machine with CC1101 connected to SPI port (wiring instructions for raspberry pi)

Setup

$ pip3 install --user --upgrade git+https://git.hammerle.me/fphammerle/intertechno-cc1101-mqtt

On Raspbian / Raspberry Pi OS, dependencies can optionally be installed via:

$ sudo apt-get install --no-install-recommends python3-spidev python3-paho-mqtt

Usage

$ intertechno-cc1101-mqtt --mqtt-host HOSTNAME_OR_IP_ADDRESS

Send ON or OFF to topic intertechno-cc1101/[ADDRESS]/[BUTTON_INDEX]/set.

$ mosquitto_pub -h MQTT_BROKER -t intertechno-cc1101/12345678/0/set -m ON

⚠️ Support for TLS is not implemented yet. Do not connect to brokers via unprotected networks (e.g., internet, wifi network).

Docker 🐳

$ sudo docker build -t intertechno-cc1101-mqtt .
$ sudo docker run --name intertechno_cc1101_mqtt \
    --read-only --cap-drop ALL --security-opt no-new-privileges \
    --device /dev/spidev0.0 intertechno-cc1101-mqtt \
    intertechno-cc1101-mqtt --mqtt-host HOSTNAME_OR_IP_ADDRESS …

Docker Compose 🐙

Clone this repository.
Adapt command in docker-compose.yml.
sudo docker-compose up --build